We are open! Free USA Shipping on orders over $200! (See Shipping policy for more details)


What about the back of the meter? Will RF come back through the utility box?

Open tab

This is the most common question we get asked, hence why we have listed it first. The answer is NO - RF will not come back into the house. The reason is that the utility box itself  is made of metal which blocks RF.  The glass part of the smart meter is where the RF radiation emanates from. Unfortunately, the RF transmits outwardly in ALL directions  - anywhere inside the house that has line of site to the glass portion of the smart meter will be subject to RF exposure. But, once the Smart Meter Cover is installed, the cover combined with the back of the metal utility box forms a cage that contains the RF.  Once the Smart Meter Cover is in place the high frequency radiation cannot escape and ~98% of the RF energy is reduced. Please see our demonstration video here.

How do I know if the Smart Meter Cover is working?

Open tab

Occasionally a customer will write to say that the Cover is not effective – so far, every time this has happened, it is because the customer happens to be measuring the wrong type of EMF.

There are THREE main types of electromagnetic fields (EMFs).  All three have been linked to important biological effects in the scientific research studies, and each type of EMF is measured with a different kind of test instrument... 

The Smart Meter Cover reduces the RF (or microwave) radiation from the transmitter inside the smart meter. To ensure the cover is working properly in reducing RF you would need to measure with an instrument that measures RF (again typically this is measured in μW/cm² or μW/m²). Many inexpensive “EMF” meters on the market will only measure the electric or magnetic fields coming from the utility box.

Summary of the three types of electromagnetic fields (EMFs)

Radio Frequency (RF) Fields (including microwaves)

Radio Frequency (RF) Fields (including microwaves) have been linked to several kinds of health problems.  RF fields are emitted from many wireless and electronic devices – cell towers, cell phones, cordless phones, TV/radio broadcast towers, Smart Meters, Wi-Fi, wireless computers and components, baby monitors, microwave ovens, radar, etc.  In the US, they are usually measured in units of “microwatts per centimeter squared” (μW/cm²).

ELF Magnetic Fields

ELF Magnetic Fields are an EMF component commonly linked to serious health effects in the research studies.  Common sources include power lines, electrical wiring, light fixtures, appliances and most other electrical devices.  Wiring errors and stray electricity in pipes can sometimes create surprisingly high levels.  Magnetic fields are measured with an ELF* gaussmeter, in units called “milligauss” (mG).

(*Note: “ELF” or “extremely-low-frequency” is the scientific name for the EMF frequency range that includes the 60 cycles-per-second – or 60 Hertz – electricity used in the US and Canada.)

ELF Electric Fields

ELF Electric Fields have also been linked to important biological effects but have been studied less in the research.  Electric fields are usually caused by hidden electrical wiring within walls, by nearby power cords for lamps and devices, and sometimes from overhead power lines.  Electric fields induce measurable voltages onto the skin, which are easily detected with a Body Voltage Meter, in units of “AC Volts” (VAC).

Does the Smart Meter Cover fit every smart meter?

Open tab

Based on customer feedback, the cover fits about 95% of electrical smart meters. Smart meters vary in size across the US and Canada. Typically the Smart Meter Cover will easily slide over the glass portion and secure to the base of the smart meter.  For smart meters that are smaller, we include two lengths of high density, waterproof neoprene foam tape to aid with properly  securing the cover. Please note, the Smart Meter Cover is NOT designed for water or gas smart meters. Please see the install instructions below for further details. If you are not happy with the fit over your cover, please return it for a FULL REFUND. 

How do I install the Smart Meter Cover?

Open tab

Installation is a snap. Just slide the Smart Meter Cover over the glass portion of the smart meter onto the base and you're done!  For smaller smart meters, we include two lengths of high density, waterproof neoprene foam tape to be placed inside the cover - there is also a nut and bolt included to tighten the cover if necessary. PLEASE DO NOT TAMPER WITH THE GLASS PORTION OF THE SMART METER!

For more detailed instructions go here 

Will the utility company know or care?

Open tab

As long as the utility company continues to get a signal they will not know or care that you have decided to take action reduce your RF exposure – see below.

Will the utility company receive a signal with the cover installed?

Open tab

The utility company should still get a signal with the Smart Meter Cover installed. The Smart Meter Cover purposely does not block ALL of the RF transmitted from the smart meter. We have yet to have a single instance where a customer told us the utility company did not get their signal. Should this happen, please let us know and return the cover for a FULL REFUND. 

What is the Smart Meter Cover made of?

Open tab

316 Stainless Steel

Can I return the cover if I am not satisfied?

Open tab

We have a 30 Day 100% MONEY BACK GUARANTEE. If for ANY REASON, you are not satisfied with the cover, simply send it back, undamaged for a FULL REFUND (minus shipping). 

Please send to:
Smart Meter Covers
14795 N 78th Way Ste 300
Scottsdale, AZ 85260

Do you sell any other EMF products?

Open tab

Yes! We offer many EMF products from EMF meters, dirty electricity filters, to men's EMF boxer briefs. Check our products at https://smartmetercovers.com/collections/other-emf-products

What is your shipping and international policy?

Open tab

- We ship to the United States and Canada

- Shipping for smaller orders is typically via USPS Priority Mail. Shipping of items over 4 pounds is usually UPS Ground.

- Due to COVID-19 limitations please allow 1-2 days for processing.

- Tracking number is emailed to the buyer once order is shipped.

International orders

Please note that the recipient of an international shipment may be subject to import taxes, customs duties and fees which are imposed once a shipment reaches the recipient's country. Any such taxes, duties or fees are to be paid separately by the buyer.  

What is your return policy?

Open tab

Returns are accepted within 30 days of delivery and must not be sent back damaged in order for a refund. 

As we are a small business and want to keep our product cost low for EVERYONE to benefit, the customer will be responsible for shipping charges. This includes if a customer incorrectly measures their smart meter/Wi-Fi cover - so as mentioned in the product listing, please measure before you purchase. 

Returns can be sent to:

Smart Meter Covers
14795 N 78th Way Ste 300
Scottsdale, AZ 85260

Want to know anything else?

Open tab

If there is anything else we can support you with, please contact us at info@smartmetercovers.com

Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Shopping Cart

Your cart is currently empty.
Shop now